Brake Motors
Brake Motors
The Indian Electric Co. is foremost brake motor dealers, distributors and traders in India, Pune, Mumbai, Raipur. We have a long-standing history in the supply of quality electric motors over a period of close to years. We are also the authorized dealers of some of the largest companies in the industry. We are differentiated by our integrity and quality service.
We are familiar with the dynamic needs of the Indian market, small workshops and large-scale factories and offer solutions that are strong, durable and easily serviced. We work with leading brands such as CG Power, Siemens, Bharat Bijlee and Havells; this will be the best quality that you will get to use. The large inventory and effective supply chain ensure that you acquire the appropriate motor when it is required and this reduces your downtime and maximizes your productivity.
Types of Brake Motor:
Being as recommended brake motor dealers in India, according to performance and applications there are different types which are given below.
- AC Brake Motors: These are motors which operate on alternating current (AC) to run the brake. We have extensive applications in many industrial applications due to Our high torque and strong performance.
- DC Braking Motors: These brake motor traders in India have a smoother braking effect and We operate on direct current (DC). These are suitable in cases in which very fine control and sensitive halting must be applied.
- Fail-Safe Brake Motors: This is a motor, which is made to engage the brake in the event of power loss. This is a very important safety measure to avoid accidents and damage to the equipment in case of a power failure.
- Flameproof Brake Motors: FB motors are designed to be safe in a dangerous or explosive atmosphere, and therefore are constructed with a special design to hold back any possible sparks.
- Hydraulic Brake Motors: These depend on hydraulic pressure in order to regulate the braking system.
- Pneumatic Brake Motors: In this, a series of compressed air is used to open the braking system.
Technical Specification of Brake Motor:
We've added below a specialized table of brake motor in India that provides further technical specification information.
| Specification | Details |
|---|---|
| Brake Type | Electromagnetic Disc Brake (failsafe, spring-applied, power-off engaged) |
| Brake Torque | 120-150% of motor's nominal torque (must be higher to stop the load) |
| Brake Power | AC or DC supply to the brake coil |
| Duty Cycle | S4/S5 (for frequent start/stop cycles, e.g., cranes) |
| Protection Class | IP55 (standard for dust and water protection) |
| Features | Manual release lever, ATEX-certified options, encoder compatibility |
Benefits/Features of Brake Motor:
As brake motor distributors in India, we are provided different types of benefits according to safety purpose which are given below.
- Increased Safety: The integrated brake helps to provide a fast and instantaneous halting of the motor, which is vital in the prevention of accidents and safety of the workers. It also keeps the load firmly in place even when there is power interruption.
- Precision Control: Brake motors can be positioned to place the load and machinery accurately which is necessary in applications such as packaging, printing and CNC machines. This accuracy lowers the wastage and enhances the quality of products.
- Space, Cost Saving: Because the motor has a built-in brake it does not require a separate braking system. This will save on a lot of space; it will make the wiring very simple and will also save on general installation expenses.
- High Durability: The regulated halting motion reduces the mechanical stress and wear and tear of the machine. This will result in increased lifetime of the equipment and reduced maintenance expenses.
- Better Efficiency: Brake motor dealers in India provide better operational efficiency of the whole system by avoiding instances of coasting of motors and facilitating quick starts and stops. This is time-saving and increases productivity.
Applications of Brake Motor:
Serve as recommended brake motor traders in India, it is applicable in different system which are given below.
- Cranes and Hoists: Cranes and Hoists are necessary in lifting heavy loads whereby, the brake motor causes the load to come to a halt in a set position and hold on to it, hence the load does not fall.
- Conveyor Systems: These are employed in manufacturing and logistics to bring about a stoppage of the conveyor belts at certain locations to permit loading or unloading of materials with pinpoint accuracy.
- Machine Tools: Brake motors are used in cutting, drilling and grinding machines to give rapid and precise stoppage of the tool. This eliminates over-cutting and makes it safe to the operator.
- Lifts and Elevators: Brake motor distributors in India are crucial in lifts of passengers and goods such that We offer a measure of control in the stopping point at every floor and We also keep the cabin stable and safe.
- Packaging Machinery: These motors are used to provide accurate and repeatable movement of items such as filling and sealing an item such that the machine must pause when the packaging must occur to ensure the packaging is done effectively.
Why Choose Us for Brake Motor?
- Quality Assurance: The products that we sell are original brake motors of known international and Indian brands like CG power, Siemens, Bharat Bijlee and Havells.
- Big Line Products: Our stocks too are extensive with dozens of brake motors that would fit in any industry as long as you buy the right one.
- Professional Advice: You can be directed by our professionals, since we possess the appropriate technical advice to enable us make a choice towards the most suitable motor.
- Efficient Supply: We also deliver your order on time because we are perceived to be efficient distributors and thus, your operations do not experience any hitches due to the lack of efficiency in supply.
As premier brake motor dealers, distributors and traders in India in The Indian Electric Co. have a forerunner in the usage in industries with single control of motion. We soften the power of an electric motor and braking system in a fantastic flawless manner. This is because of Our ability to halt and ferry loads precisely which makes them critical in various types of industries where safety is upheld, efficiency is enhanced and the costs incurred in the operations are reduced. We are a necessity of any company that considers security and accuracy. Contact us for more details.